SmartTransfer (WTS) | Martin Till

Martin-Till SmartTransfer

The Martin-Till SmartTransfer is a fully ISOBUS-integrated hydraulic weight transfer controller that delivers real-time control, angle monitoring, and precise downforce management. Designed for fast setup and easy operation.

A common question we’re asked: “How do I know if my weight transfer system needs adjusting?”

Before now, the only answer was to stop the planter and visually compare the parallel linkage angles on the wings versus the center section. With SmartTransfer, that’s no longer necessary — you can now see those angles in real time inside the cab and adjust PSI on the fly to maintain proper planter geometry and consistent row unit performance.

Key Features:

5 Custom Presets: Instantly switch between preset PSI settings for varying field conditions.
Linkage Angle Feedback: Monitors actual row unit linkage angles at the center, left wing, and right wing— ensures balanced toolbar geometry and consistent row performance.
Real-Time Weight Transfer Display: Shows actual pounds transferred to the wings — helps fine-tune PSI for even weight distribution.
Precision PSI Control: Adjust downforce directly from the ISOBUS terminal — no extra controller required.
Fast, Universal Setup: Easily retrofit existing systems by entering a few simple measurements — no custom wiring or calibrations needed.

Testimonials

What People Are Saying

Support has never been an issue. I was able to increase efficiency on the farm without adding more operators.

Anthony Schroeder

Ohio

Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.

Chad Tryon

Ohio

Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.

Scott Gaier

Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.

Steve Hines

Ashville, Ohio

Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.

Jake Henry

Ohio

We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!

Jeff Adams

Scott, Ohio

Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!

Jim Patton

Hillsboro, Ohio

Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.

John Deere 8310R

This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.

Massey Ferguson 1736

Belpre, Ohio

Martin-Till SmartTransfer

Related Products

What People Are Saying

We are farmers, too.