SmartDepth | Precision Planting | Precision Agri Services

Precision Planting SmartDepth

Works with 20|20

SmartDepth™ from Precision Planting allows you to quickly and easily make depth adjustments, from inside the cab, as conditions change. This saves you time and gives you the confidence that each row is set right where you need it to be.

Too Shallow, Too Deep, Just Right

Many farmers believe that getting planting depth deep enough so each seed is in moisture is the proper way to set depth. While getting into moisture is important, there are tradeoffs to planting too deep or too shallow. If planted too shallow, seeds potentially are not in moisture and will not germinate consistently.

What about when there is plenty of moisture in the soil, even at shallower depths? In this scenario, planting deeper than necessary will cost you emergence speed and consistency due to less heat being available at the deeper depths, which drives emergence.

The Same Depth Setting Doesn’t Mean the Same Depth

Even when set to the same depth setting, the actual planting depth across a planter can vary by up to ½” because of manufacturing variance and wear. You can check this variability on your planter by doing a block check in your shop. SmartDepth removes row-to-row variability through a calibration process to make sure the same depth setting truly means the same depth.

Testimonials

What People Are Saying

Support has never been an issue. I was able to increase efficiency on the farm without adding more operators.

Anthony Schroeder

Ohio

Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.

Chad Tryon

Ohio

Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.

Scott Gaier

Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.

Steve Hines

Ashville, Ohio

Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.

Jake Henry

Ohio

We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!

Jeff Adams

Scott, Ohio

Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!

Jim Patton

Hillsboro, Ohio

Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.

John Deere 8310R

This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.

Massey Ferguson 1736

Belpre, Ohio

Precision Planting SmartDepth

Works with 20|20

Too Shallow, Too Deep, Just Right

The Same Depth Setting Doesn’t Mean the Same Depth

Related Products

What People Are Saying

We are farmers, too.