Frame Weight Distribution Kits

LDM Frame Weight Distribution Kit

LDM Frame Weight Distribution (FWD) kits from LDM Ag Services are one of the best solutions available for fighting against planter compaction.

Kits use hydraulic cylinders and a control system to transfer excessive center fill weight out to the wings, eliminating compaction and helping to maintain ride quality and depth for wing rows.

Constant flow is supplied to the control valve, which regulates pressure out to the cylinders. Each system is designed so that the planter still maintains its full up/down flex range of motion. Two types of control systems are available.

Kits use hydraulic cylinders and a control system to transfer excessive weight out to the wings. The hydraulic cylinders are positioned above the wing flex joints with the base end connecting to the center frame and the rod end connecting to the wing.

Constant flow is supplied to the control system which regulates pressure out to the cylinders. Each system is designed so that the planter still maintains its full up/down flex range of motion. The wing just sees an additional downward load that it must overcome to flex upward. The control valve is constantly monitoring the regulated side of the circuit, adding or removing oil to maintain the desired set pressure. If the planter moves over a draw and flexes down, oil is added to the regulated side to maintain the setpoint pressure. If the planter moves over a side hill and flexes up, oil is removed from the regulated side of the circuit.

Download Brochure

Available for:

TAILORED TO FIT YOUR MODEL

John Deere Kits // Case IH Kits // Kinze Kits Coming Soon // White Kits Coming Soon

Benefits include

REDUCE COMPACTION
IMPROVE ROW UNIT RIDE QUALITY
LOW COST, EASY INSTALLATION

Testimonials

What People Are Saying

Support has never been an issue. I was able to increase efficiency on the farm without adding more operators.

Anthony Schroeder

Ohio

Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.

Chad Tryon

Ohio

Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.

Scott Gaier

Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.

Steve Hines

Ashville, Ohio

Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.

Jake Henry

Ohio

We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!

Jeff Adams

Scott, Ohio

Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!

Jim Patton

Hillsboro, Ohio

Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.

John Deere 8310R

This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.

Massey Ferguson 1736

Belpre, Ohio

LDM Frame Weight Distribution Kit

Available for:

Related Products

What People Are Saying

We are farmers, too.