360 EQUI-FLOW

360 EQUI-FLOW™ provides NH3 application technology for better row-to-row accuracy and a wider window of application.

360 EQUI-FLOW from 360 Yield Center keeps ammonia in its liquid state all the way to the knife, increasing row-to-row accuracy. And its pressurized system can operate efficiently and accurately at low temps.

HOW 360 EQUI-FLOW WORKS
  • Ammonia from the tank is delivered to the initial filter.
  • In the tower, the ammonia is separated into gas and liquid. The vapor is condensed back down into liquid and it all moves to the pump.
  • The hydraulically driven centrifugal pump pushes 100% liquid ammonia through the flow meter and control valve to the manifold.
  • The equal distribution manifold equalizes flow to each outlet.
  • Every row gets the same amount of ammonia in liquid state.
360 EQUI-FLOW SIDE-BY-SIDE TESTING

Tests with conventional systems and 360 EQUI-FLOW show the difference in row-to-row accuracy. At 120-pound application rate, the traditional system varied by over 20% and under 20% with a total error range of 45%. The 360 EQUI-FLOW application range was plus/minus 4%.

KEY FEATURES
  • Centrifugal pump condenses NH3 into liquid for even application, regardless of rate and temperature.
  • Row-to-row variation shows up at the worst time for corn production. 360 EQUI-FLOW produces precision application for row-to-row accuracy.
  • Improved sealing at injection point, minimizing losses.

Related Products

Ag Leader ISOBUS Liquid
Read more
DirectCommand Liquid Application
Read more
Field-IQ
Read more
We Carry Many Brands Including These
Testimonials

What People Are Saying

quote
Support has never been an issue. I was able to increase efficiency on the farm without adding more operators.
Anthony Schroeder

Ohio

quote

Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.

Chad Tryon

Ohio

quote

Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.

Scott Gaier

quote

Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.

Steve Hines

Ashville, Ohio

quote

Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.

Jake Henry

Ohio

quote

We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!

Jeff Adams

Scott, Ohio

quote

Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!

Jim Patton

Hillsboro, Ohio

quote

Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.

John Deere 8310R

quote

This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.

Massey Ferguson 1736

Belpre, Ohio

support in the field
Support

We are farmers, too.

We’ve been where you are, and we know how important it is to be able to count on good, reliable advice. Your success is our success—which is why we treat your farm like it’s our own.

Meet Our Team